How To Fix PS5 DualSense Controller Drift Problem?
To fix PS5 DualSense controller drift problems, follow these steps:
Reset the Controller: Locate the hidden reset button on the back of your DualSense controller. Use a paperclip to gently press and hold the button for five seconds. Reconnect the controller to your PS5 using a USB cable and re-sync it.
Update Firmware: Ensure your PS5 and controller have the latest firmware installed. Connect your controller to the PS5 via USB and navigate to Settings > System Software Update and Settings > System Software Update and Settings > Update System Software.
Cycle Bluetooth: Turn off Bluetooth on your PS5 by going to Settings > Accessories > Controllers > Communication Method, and then hit Turn Off Bluetooth. Wait a few moments and then turn it back on.
Clean the Joysticks: Use a cotton swab dipped in rubbing alcohol and compressed air to clean the edges and area around the analog sticks. Be gentle and avoid getting liquid inside the controller.
Adjust Dead Zone: Some games allow you to adjust the dead zone, which is the range of motion where the game won't register movement. This can help minimize drift in specific games.
Push and Rotate Analog Sticks: Press the analog sticks for 10 seconds, rotate them clockwise for 10 seconds, counterclockwise for 10 seconds, and then press them in for an additional 10 seconds.
Check for Hardware Issues: If the above steps don't resolve the issue, you may have a hardware problem. If your controller is still under warranty, consider contacting Sony for a repair or replacement.
Please note that opening the controller to replace the analog sticks should only be done if you have the necessary skills and tools, as it can void the warranty and potentially cause further damage.